我如何从Spartan6写到Nexys3 FPGA板上的Micron外部Cellular RAM?[英] HOW do I write from a Spartan6 to the Micron external Cellular RAM on the Nexys3 FPGA Board?

本文是小编为大家收集整理的关于我如何从Spartan6写到Nexys3 FPGA板上的Micron外部Cellular RAM?的处理/解决方法,可以参考本文帮助大家快速定位并解决问题,中文翻译不准确的可切换到English标签页查看源文。

问题描述

我到处都是,数据表,Xilinx网站,Digilent等,等等,找不到任何东西!我能够使用Adept工具来验证我的蜂窝RAM是否正常运行,但是我找不到任何库存VHDL代码作为控制器来将数据写入并从中读取数据!帮助!

推荐答案

找到了此链接,但它适用于异步模式,这还不够快: http://embbsi.blogspot.com/2013/01/how-to-use-cellular-ram-from-micron.html

最终在Nexys 2 Digilent页面上找到了这一点: http://www.digilentinc.com/products/detail.cfm?prod=nexys2 在下面 "车载内存控制器参考设计" 令人遗憾的是,Nexys 3细节不包括在内,因为它可以节省很多时间! 希望其他问题至少可以找到我在这里发布的内容并迅速找到它...

本文地址:https://www.itbaoku.cn/post/2090987.html

问题描述

I have looked everywhere, the datasheet, the Xilinx website, digilent, etc. etc. and can't find anything! I was able to use the Adept tool to verify that my Cellular RAM is functioning correctly, but I just can't find any stock VHDL code as a controller to write data to and read data from it!! Help!!

推荐答案

Found this link but it's for asynchronous mode, which is not nearly fast enough: http://embsi.blogspot.com/2013/01/how-to-use-cellular-ram-from-micron.html

Eventually found this on the Nexys 2 Digilent page: http://www.digilentinc.com/Products/Detail.cfm?Prod=NEXYS2 under "Onboard Memory controller reference design" It's just a shame that this was not included with Nexys 3 details as it would have saved a lot of time! Hopefully somebody else with this issue could at least find what I posted here and find it quickly...